Wet And Dry Combined Salt Spray Tester
Wet And Dry Combined Salt Spray Tester
Wet And Dry Combined Salt Spray Tester
173
172
1788

GA-2008 Wet And Dry Combined Salt Spray Tester

Tester ng Spray ng Asin GA-2007-I Salt Spray Tester (200 Type)
Two Box Thermal Shock Chamber GA-2009-A Two Box Thermal Shock Chamber

Kategorya:

Paglalarawan

Wet And Dry Combined Salt Spray Tester

Meet the standards:

GB/T5170.8, GB/T10587, GJB150.11, GB/T10125, GB/T2423.17, atbp.

DIN50021 DIN50017 DIN50907 ISO 11977 ISO 9227 ASTM B117

ASTM G85 automobile and other industrial specifications.

Wet And Dry Combined Salt Spray Tester

Pagtutukoy

1.Experimental space: 900×600×500(W×D×H)mm other sizes can be customized

2.Outer space: according to the actual size

  1. Suplay ng kuryente: 380V 6KW 50HZ MAX 30A
  2. 4. Materials:

(A) imported PVC board is adopted in the laboratory, which is acid and alkali resistant.

(B) imported PVC board in the outer box, resistant to acid and alkali.

(C) the test replenishment tank is equipped with a hidden water table, which is easy to clean and not easy to break.

(D) the saturated air barrel adopts SUS#304 stainless steel high-pressure barrel with the best insulation effect.

5, according to customer test requirements, can be set the salt dry and wet composite test

Salt spray test – moisture/Wet test

(A) brine spray laboratory: NSS, CASS

(1) laboratory: 10℃ ~ 50 °C

(2) saturated air bucket: 47℃ ±1℃

(B) moisture test:

(1) temperatura: 40℃ ±2℃

(2) kahalumigmigan: more than 93%~100%

(2) saturated air bucket: 47℃ ±1℃

(C) drying test:

(1) temperatura: 15℃~50℃ ±1℃

(2) kahalumigmigan: over 30%

6.Sistema ng suplay ng hangin

The air pressure is 1kg/cm2, which can be adjusted in two stages. The first is the imported pressure regulating filter with the function of filtering water.

Adjust to 2-2.5kg/ cm2 roughly, the second is the imported precision pressure regulating valve, adjust to the pressure gauge 1kg/ cm2.

7.Spray method:

  1. Apply bernouldt principle to take and absorb salt water and atomize it, the atomization degree is even, without blocking crystallization, to ensure the standard of continuous test.
  2. Nozzle: made of special glass nozzle, the size and Angle of spray can be adjusted.
  3. Spray volume: adjustable 1.5± 0.5ml 80cm2/Hr (16-hour average volume).
  4. large brine storage tank, 48HR continuous spray.

8.Pag init ng sistema:

External hot air heating method is adopted to reduce standby time and component damage rate.

S.S.R control heating power, accurate temperature, low power consumption.(titanium alloy corrosion prevention tube for electric heat pipe)

Wet And Dry Combined Salt Spray Tester

  1. Circuit control system
  2. The main controller adopts 7-inch LCD human-machine interface, and the main screen can plan the test program.
  3. The fixed time can be set 0-999 H 59 MIN.
  4. The program mode can set salt spray and moisture test at the same time
  5. With power off memory device, the remaining program can be continued when power back.
  6. The rise and drop of temperature can be used for speed control and self-calibration of temperature and humidity reference points.
  7. Temperature and humidity sensor the DIN PT – 100 Ω (platinum).

Wet And Dry Combined Salt Spray Tester

10.Inlet and drainage system:

The water inlet adopts the automatic water replenishment system. When the water level is too low, it will be replenished automatically, and manual water replenishment can be used.

Drainage water pump with acid, alkali and corrosion resistance, increase the service life, reduce the waiting time for drainage.

All pipeline accessories are imported acid-alkali corrosion resistant components, mahabang buhay.

Wet And Dry Combined Salt Spray Tester Wet And Dry Combined Salt Spray Tester Wet And Dry Combined Salt Spray Tester