Paglalarawan

Ohm Meter

Brief Introduction

AT2511 is the upgrade version of AT511A, is a resistance meter with high-cost performance and small volume, which can measure 10μΩ – 200kΩ, max reading 5000 dgt.It is quite suitable for resistance measurement under low power conditions or factory inspection and product sorting based on its sorting function.

 

Ohm Meter

Teknikal na Parameter

MGA PAGTUTUKOY

AT2511

AT511C (discontinued)

Parameter

DC resistance

Pangunahing Katumpakan 0.2% 0.3%
Saklaw ng Pagsukat 10μΩ~200.0kW 0.1mW~50.00kW
Signal Source I – Max: < 100mA
Saklaw Automatic and manual with 8 ranges Automatic and manual with 6 ranges
Bilis Slow: 3 times/second; Fast: 10 times/second
Result Display Ipakita ang
Max Reading 5000
Pag-aayos Short-circuit Zero-Adjust for each range
Comparator OFF, PASS, HIGH, LOW Wala na
Beep OK, NG, OFF Wala na
Test Lead 4 terminal shielding(2 check terminal and 2 driving terminal) and external shielding ground section
Ang iba naman LED display
Applications Small diameter coil (headset coil); resistance of sensor;

Resistance test of protective device; ordinary transformer, inductor, motor, deflection coil winding resistance; all kinds of contact resistance; welding point contact resistance; mental defect detection

PANGKALAHATANG MGA TAMPOK
Power Supply Boltahe: 198V AC – 240V AC. Dalas: 50Hz. Kapangyarihan: Max 15VA. Optional 110VAC
Sukat 220mm (Lapad ng katawan)x85mm (Taas)x259mm (Depth), 2kg
ORDERING INFORMATION
Accessory ATL503: Kelvin test leads

AC kapangyarihan kurdon