TH2810D Digital Inductance Meter TH2811D
- Descripción
- Consulta
Descripción
Inductance Meter
Características
100Hz,120Hz,1kilociclos,10kilociclos 4 typical test frequencies
4.3 inch TFT liquid crystal display, chino e ingles
optional operation interface
6-digit reading resolution
Maximum test speed:12.5EM, support low frequency and high
velocidad:TX4+3ms
10 clasificación de contenedores, test sorting is more perfect
100 sets of LCRZ instrument setting files, 10 medidas
Soft power switch
Support 110V/220V two power supply voltages
10-point list sweep, support multi-frequency test sorting
Ultra-low signal source output offset (<100μV), meeting the
needs of large inductor, common mode choke inductor test
Super impact protection
Power on state lock button;
Empty fixture judgment
Función de registro de datos
Screen capture function
Interface function, momento, trigger delay, etc.. are more complete
Inductance Meter
Parámetro técnico
| Modelo | TH2810B+ |
| Precisión básica | 0.1% |
| Frecuencia de prueba | 100Hz,120Hz,1kilociclos,10kilociclos |
| Parámetros de prueba | l, C, R,z|, D, q, X, d, tr, Vm, Soy, % |
| V/I Monitor | Sí |
| AC Test Signal Level | 0.1Vrms,0.3Vrms,1Vrms |
| Signal Source Internal Resistance | 10Oh, 100Oh |
| Test Terminal Configuration | 5-Terminal |
| Prueba de velocidad(ms/tiempo) | Rápido: 19EM; Medio:83EM; Lento: 333msF≤120Hz Fast :4XT+3ms |
| Compensación cero | Abierto, Short, Carga |
| Barrido de lista | 10-point list sweep; Each scan point can be individually sorted, support multi-frequency combined test sorting; Scanning test for frequency and AC voltage |
| EquivalentCircuit | Series, Parallel |
| Modo de rango | AUTO, SOSTENER |
| Modo de disparo | Interno, Externo, Manual, Bus |
| Tiempos promedio | 1-255 |
| Arithmetical Operation | lectura directa, abdominales,% |
| Delay | Retardo de disparo, step delay: 0—60.000s, 1ms step |
| Función general | Series, parallel equivalent mode, calibración: circuito abierto, cortocircuito, range selection: automático, manual, trigger mode: EN T, HOMBRE,EXT, AUTOBÚS, keyboard lock function |
| Comparador | 10 clasificación de contenedores,BIN1-BIN9,NG,A; Bin count function PASS, FALL front panel LED display |
| Nonvolatile Storage | 100 sets of LCRZ instrument setting files, 10 test results |
| External USB Storage | Instrument setting file, CSV data file |
| Modelo | TH2810D | TH2811D |
| Measurement Function | ||
| Test Parameter | L-Q, C-D, R-Q,z|-q | |
| Precisión básica | 0.1% | 0.2% |
| Equivalents Circuit | Series, parallel | |
| Mathematical Functions | Deviation and PercentDeviation | —— |
| Rang Mode | Auto, Sostener | |
| Modo de disparo | Interno, Manual andExternal | Interno |
| Velocidad de medición | Rápido: 12, Con: 5.1, Lento: 2.5 (meas/ sec) | |
| Correction Function | Open/Short multi-frequency Zeroing | |
| Measurement Terminals | Five Terminals | |
| Señal de prueba | ||
| Frecuencia de prueba | 100Hz,120Hz,1kilociclos,10kilociclos,Exactitud 0.01% | |
| temperatura de operacion & Humedad | 0°C – 40°C, ≤90% HR | |
| Requisitos de energía | Voltaje | 99V – 121V, 198V – 242V |
| Frecuencia | 47.5Hz – 63Hz | |
| El consumo de energía | ≤20 VA | |
| Dimensiones (Ancho×Alto×Profundidad) | 270mmx130mmx300mm | |
| Peso | Aprox.. 3.7kg | |
