Probador de mandril cilíndrico GA-6004

Descripción

Probador de mandril cilíndrico

Estándares

YO ASI 1519 – 2011 Pinturas y barnices–Prueba de flexión (cylindrical mandrel)

Probador de mandril cilíndrico

Bending coated sheet metal over a defined radius

is an indicator of the elongation and adhesion of a paint film at bending stress.

Pushen offers two types of mandrel bending testers,cylindrical mandrel and conical mandrel.

This is used for simple and quick testing of the flexibility of a coating by bending a coated panel

over a rod of known diameter and then examining the coating for caracking,descamación,or other damage.

1.Made of anodized aluminum

2.12 mandrels of stainless steel

3.Panels up to 50mm width can be tested

4.Rod dia sizes：2，3，4，5，6，8，10，12，16，20，25，36milímetros

Probador de mandril cilíndrico

Procedimiento

– Apply the paint film on sheet metal strips

– Coat and dry film carefully to ensure reproducible results

– For testing,uniformly bend the coated samples over the mandrels within 1-2 sec at 180 grados

– Start with the largest radius,continued until reaching the radius at which the film shows cracks

Probador de mandril cilíndrico

Realizar pedidos & Especificaciones técnicas

Cat.No.	Dimensiones	Peso neto	Peso de envío
2695	230×170×110 mm	5.5 kg	7.0 kg