Instrumento de medición de cilindricidad GA-1802-B
- Descripción
- Consulta
Descripción
Principle of instrumental measurement
Using radius measurement method, workpiece rotation. High precision air floating spindle is used as reference. Using imported precision circular grating, precision inductance displacement sensor and computer components. Measure the Angle and radial displacement of the measured workpiece to ensure the accuracy of the angular displacement and radial value of the measured workpiece; The measurement software adopts CA system measurement software based on Chinese Windows operating system platform to complete data collection, data processing and printing.
Instrumento de medición de cilindricidad
Measurement functions
Measuring function: cylindricity meter, roundness, straightness, coaxiality, concentricity, end runout, end runout, verticality, paralelismo, llanura
Analysis functions: surface waviness, spectrum analysis, wave height analysis, adjacent chip runout, segment difference
Roundness evaluation method (4 kinds) : minimum area method, least square method, minimum circumscribed circle method, maximum circumscribed circle
Roundness filtering method: 1, 1-500, 1-150, 1-50, 1-15, 15-500
Waviness filtering: 3-16, 3-17, 15-500, 17-100
Filtering form: Gaussian (ISO standard)
Instrumento de medición de cilindricidad
Use requirement
Air compressor air source pressure: 0.45 ~ 0.80Mpa
Air compressor air source flow: ≥0.2m3/min
Power requirement: about 500W; Ac 220V±10%, 50Hz
Environmental requirements: temperatura: 10 ~ 30 ℃; Humedad relativa: < 85%
There is no obvious vibration source at the installation site
Separate ground
Instrumento de medición de cilindricidad
Especificación técnica
| Artículo | Especificación | |
| Rango de medida | Max diameter | Ф400mm |
| Min inner diameter | ф3mm | |
| Max height | 550milímetros | |
| Accuracy of principal axis | radial error | ±(0.025+5H/10000)μm |
| axial error | ±(0.025+6X/10000)μm | |
|
Parallelism between axis of rotation and z-axis guide rail |
2μm/400mm（Busbar benchmark） | |
| workbench | Mesa diameter | Φ200mm |
| swing diameter | Φ420mm | |
| load capacity | 60Kg | |
| adjustment range | Adjustable eccentric±2mm ; Adjustable level±1° | |
| Velocidad rotacional | 0-12 rpm（adjustable） | |
| Column | Straightness (narrow range) | 0.5μm /100mm |
| Straightness (Rango completo) | 0.8μm /400mm | |
| horizontal arm | Horizontal travel distance | 180milímetros |
| Move speed | 0.5-6mm/s OR MANUAL | |
| Sensor | Ataque | 500μm (Radius difference) |
| resolución | 0.005μm | |
| Needle shape | Ruby ball probe（diameter 2mm） | |
| Sensor direction/adjustment Angle | either direction/±45° | |
| data collection | Imports grating 14400 point/week | |
| aumento | Any to a maximum of 200,000 veces | |
Parámetro
| （Product） | (Packing) | Peso(Wt.kg) | Volume（CBM m³） | ||||||
| Lx | Ly | Lz | Wt(kg) | Lx | Ly | Lz | Wt(kg) | ||
| 960 | 650 | 1550 | 240 | 1000 | 750 | 1650 | 50 | 290 | 1.23 |
Instrumento de medición de cilindricidad
Principle of instrumental measurement
Using radius measurement method, workpiece rotation. High precision air floating spindle is used as reference. Using imported precision circular grating, precision inductance displacement sensor and computer components. Measure the Angle and radial displacement of the measured workpiece to ensure the accuracy of the angular displacement and radial value of the measured workpiece; The measurement software adopts CA system measurement software based on Chinese Windows operating system platform to complete data collection, data processing and printing.
Instrumento de medición de cilindricidad
Measurement functions
Measuring function: cylindricity meter, roundness, straightness, coaxiality, concentricity, end runout, end runout, verticality, paralelismo, llanura
Analysis functions: surface waviness, spectrum analysis, wave height analysis, adjacent chip runout, segment difference
Roundness evaluation method (4 kinds) : minimum area method, least square method, minimum circumscribed circle method, maximum circumscribed circle
Roundness filtering method: 1, 1-500, 1-150, 1-50, 1-15, 15-500
Waviness filtering: 3-16, 3-17, 15-500, 17-100
Filtering form: Gaussian (ISO standard)
Use requirement
Air compressor air source pressure: 0.45 ~ 0.80Mpa
Air compressor air source flow: ≥0.2m3/min
Power requirement: about 500W; Ac 220V±10%, 50Hz
Environmental requirements: temperatura: 10 ~ 30 ℃; Humedad relativa: < 85%
There is no obvious vibration source at the installation site
Separate ground
Especificación técnica
| Artículo | Especificación | |
| Rango de medida | Max diameter | Ф400mm |
| Min inner diameter | ф3mm | |
| Max height | 550milímetros | |
| Accuracy of principal axis | radial error | ±(0.025+5H/10000)μm |
| axial error | ±(0.025+6X/10000)μm | |
|
Parallelism between axis of rotation and z-axis guide rail |
2μm/400mm（Busbar benchmark） | |
| workbench | Mesa diameter | Φ200mm |
| swing diameter | Φ420mm | |
| load capacity | 60Kg | |
| adjustment range | Adjustable eccentric±2mm ; Adjustable level±1° | |
| Velocidad rotacional | 0-12 rpm（adjustable） | |
| Column | Straightness (narrow range) | 0.5μm /100mm |
| Straightness (Rango completo) | 0.8μm /400mm | |
| horizontal arm | Horizontal travel distance | 180milímetros |
| Move speed | 0.5-6mm/s OR MANUAL | |
| Sensor | Ataque | 500μm (Radius difference) |
| resolución | 0.005μm | |
| Needle shape | Ruby ball probe（diameter 2mm） | |
| Sensor direction/adjustment Angle | either direction/±45° | |
| data collection | Imports grating 14400 point/week | |
| aumento | Any to a maximum of 200,000 veces | |
Parámetro
| （Product） | (Packing) | Peso(Wt.kg) | Volume（CBM m³） | ||||||
| Lx | Ly | Lz | Wt(kg) | Lx | Ly | Lz | Wt(kg) | ||
| 960 | 650 | 1550 | 240 | 1000 | 750 | 1650 | 50 | 290 | 1.23 |
