Probador de resistencia a la presión de botellas BLP-10

Descripción

Probador de resistencia a la presión de botellas BLP-10

Introduction to the instrument:

The internal pressure resistance tester for glass bottles is developed and produced according to the national standard GB/T4546-2008 internal pressure test method for glass containers. Comply with the international standard ISO7458-2004.

 

Probador de resistencia a la presión de botellas BLP-10

Método de detección:

Método A: Apply a uniform internal pressure test within a predetermined period of time, and the bottle is qualified if it is not broken for 60 segundos. And incremental experiments that gradually increase the pressure.

Método B: Increase the internal pressure according to the predetermined constant speed test, Pr=1.38P60+0.1783, increase the pressure to Pr, no pressure retention, pressure immediately relief, the bottle does not break is qualified! When the sample bottle is broken midway, the peak of the maximum destructive force of the bottle is recorded.

Uso: Mainly used for glass bottles, glass infusion bottles.

 

Probador de resistencia a la presión de botellas BLP-10

Parámetros técnicos:

1.The machine can be “pass”, “incremental”, “destructive” test requirements;

2.Real-time display of pressure holding value, damage peak value and the corresponding P60 value, test times, Chinese character printout;

3.Rango de sensores: 0-6MPa, safety overload 7.2Mpa;

4.Comprehensive error: <0.5%FS5. Display accuracy: 0.001MPa;

6.Temperatura de trabajo: 5 — 40℃;

7.Linear rate supercharging: 0… 58±0.1Mpa/s(4±1bar/s);

8.Pressure medium: agua;

9.Fuente de alimentación: 220V50HZ rated power 0.6KW;

10.Display output: touch screen testing system display measured value, set value, P60 value and times;

 

Probador de resistencia a la presión de botellas BLP-10

Usage characteristics:

1. Alta precisión de medición, direct detection of bottle pressure, pantalla en tiempo real, fast working frequency, alta estabilidad! Large range, the maximum set test pressure is 6.00Mpa;

2. La velocidad de prueba es rápida.. The test time for each bottle should not exceed 8 segundos;

3. Glass and water separation, easy to work, water can be directly discharged into the sewer pipe;

According to the user specifications of different sizes of fixture.