VDT-T10 Electrostatic Discharge Tester
- Beschreibung
- Anfrage
Beschreibung
VDT-T10 Electrostatic Discharge Tester
Produktbeschreibung
Voltage sags, short interruptions are caused by sudden changes in power grid, power facility failures or loads. In some cases there will be two or more consecutive rollovers or interrupts. The voltage change is caused by a continuous change in the load connected to the grid. If the EUT on the power supply voltage changes cannot respond in a timely manner, it may lead to failure. The voltage drop generator is used to evaluate the performance of electrical and electronic equipment when subjected to voltage sags, short interruptions, and voltage changes. Products fully meet the latest requirements of IEC/ EN 61000-4-11.
VDT-T10 Electrostatic Discharge Tester
Merkmale
- Vollständig mit den neuesten Standards IEC/ EN konform 61000-4-11
- Benutzerfreundliches 7-Zoll-Touchpanel-Display
- Unterstützt mehrere Sprachen & Benutzer erleichtern
- Integriertes Umgebungs-Selbsttestprogramm
- Programmierbarer Betrieb
- Vorprogrammierte IEC 61000-4-11 Testeinstellungen
- RS232-Schnittstelle, PC-Steuerungsbetrieb & Druckbarer Testbericht
- Bequemer Gebrauch und bequemer Betrieb
VDT-T10 Electrostatic Discharge Tester
Technical data
| Modell | VDT T10 |
|
Voltage variation range |
0~120% |
| Voltage change duration | 1~ 9999 half cycle |
| Switching phase | 0~ 359°synchronous, asynchronous, or automatic |
| Built-in standard test grade | 0, 40%, 70%, 80% |
| Jump time | 1μs~ 5μs |
| Voltage changes in the number of repeat | 1~ 9999 |
| Interval cycle of voltage variation | 1~ 9999 half cycle |
| Drop mode | Set at random |
| EUT capacity | Three phase, 10A |
| Stromversorgung | AC220V 50/60Hz |
| Umgebungstemperatur | 15℃~ 35℃ |
