GA-F205 Fully automatic cement component measurement system

Beschreibung

GA-F205 Fully automatic cement component measurement system

ICH. Produktübersicht

This fully automatic cement component measurement system features automatic temperature control, automatic stirring, automatische Reinigung, automatic filtration, automatic drying, and automatic weighing, requiring minimal manual intervention and reducing human error.

GA-F205 Fully automatic cement component measurement system

II. Standards

GB/T 12960-2019 “Quantitative Determination of Cement Components”

GA-F205 Fully automatic cement component measurement system

III. Produktmerkmale

1. The fully automatic cement component measurement system uses dilute nitric acid solution to selectively dissolve components other than fly ash and pozzolan.
2. A pH 11.6 solution containing EDTA is used to dissolve components other than blast furnace granulated slag.
3. Water and nitric acid solution are automatically added when measuring fly ash and pozzolan components.
4. The sample solution is automatically stirred, and the bath temperature is automatically maintained at 20±2°C.

GA-F205 Fully automatic cement component measurement system

IV. Technische Parameter

1. Messbereich: 2% Zu 100% (admixture content)
2. Analysis time: Approximately 150 Protokoll
3. Sample weight: Approximately 0.5g
4. Number of sample locations: 8
5. Genauigkeit: Within the allowable range of standard samples
6. Repeatability limit: <0.8% (admixture content ≤ 20%)
<1.0% 20% < Mixture Content ≤ 30%
<1.2% 30% < Mixture Content
7. Drying Temperature: 105°C ± 5°C
8. Maße: 1000 × 800 × 1300 mm
9. Machine Weight: <150 kg
10. Main Unit Power: <2.5 kW
11. Power Requirements: 220 VAC/50 Hz/10 A