Anbai AT2811 Digitales Brückenmessgerät
- Beschreibung
- Anfrage
Beschreibung
Digital Bridge Meter
Descriptions
AT810D/AT2811 digital LCR meteriscreated as the smallest bench-type digital meter, this depends on Applentprofessional intelligent instrument technology. Four grades of test frequency: 100Hz, 120Hz, 1kHz, 10kHz; 6 parameters (L, C, R, Z, D, Q) can be tested and the built-in comparator caneasily deal with the sorting operation of components which made AT2811 high cost-performance.
Digital Bridge Meter
Technische Parameter
| SPEZIFIKATIONEN | |||
|
AT810D Digital LCR Meter |
AT2811 Digital LCR Meter promotion |
||
| Parameter | L,C,R,Z,D,Q,θ(deg),θ(rad) | L,C,R,|Z|,D,Q | |
| Grundlegende Genauigkeit | 0.2% | 0.25% | |
| Frequenz | 100Hz, 120Hz, 1kHz, 10kHz | 100Hz, 120Hz, 1kHz, 10kHz | |
| Anzeigebereich | L: 0.01μH-9999H C: 0.01pF-9999μF
R,Z:0.0001Ω-99.99MΩΔ%: -9999% – 9999%D: 0.0001 – 9.9999Q:0.0001-9999 |
L: 0.01mH-9999H C: 0.01pF-9999mF
D: 0.0001–9.999 Q: 0.0001–999.9 R,Z: 0.0001W – 99.99MW |
|
| Max Reading | Principle parameter: 99999 sub parameter: 99999 | ||
| Source Resistance | 30W and 100W | ||
| Reichweite | Automatic and manual with 6 ranges | ||
| Signal Level | 0.1Vrms, 0.3Vrms and 1Vrms | ||
| Geschwindigkeit | 2 times/second, 5 times/second | Langsam: 3 times/second, Schnell: 10 times/second | |
| Equivalent Circuit | In series and parallel | ||
| Result Display | Zeigen & sorting results | ||
| Adjustment | Short and open sweep frequency correction | ||
| Komparator | 5-bin sorting | ||
| Protection | 1000V/10mF,600V/80mF or 400V/150mF capacitance electrify protection | Keiner | |
| Schnittstelle | Optional RS232 | Keiner | |
| Piep | P1, P2, P3, NG, OFF | ||
| Andere | VFD display, keypad lock and data hold function | LCR automatic parameter select, LED-Anzeige | |
| ALLGEMEINE MERKMALE | |||
| Stromversorgung | Stromspannung: 198V AC – 240V AC, Frequenz: 50Hz, Leistung: Max 15VA | ||
| Größe | 264mm(Breite)x107mm(Height)x350mm(Tiefe) 4kg | 220mm (Breite)x85mm (Height)x259mm (Tiefe); 2kg | |
| BESTELLINFORMATIONEN | |||
| Zubehörteil | ATL501: Test cableATL601: Testvorrichtung
ATL600: Short-circuit device Optional: ATL608 SMD patch clamp ATL508: SMD patch test clip |
ATL501: Kelvin Test clip; Netzkabel | |
