- Beschreibung
- Anfrage
Beschreibung
Ohm Meter
Kurze Einleitung
AT2511 is the upgrade version of AT511A, is a resistance meter with high-cost performance and small volume, which can measure 10μΩ – 200kΩ, max reading 5000 dgt.It is quite suitable for resistance measurement under low power conditions or factory inspection and product sorting based on its sorting function.
Ohm Meter
Technische Parameter
| SPEZIFIKATIONEN | |||
|
AT2511 |
AT511C (discontinued) |
||
| Parameter |
Gleichstromwiderstand |
||
| Grundlegende Genauigkeit | 0.2% | 0.3% | |
| Messbereich | 10mΩ~200.0kW | 0.1mW~50.00kW | |
| Signalquelle | ICH – Max: < 100mA | ||
| Reichweite | Automatic and manual with 8 ranges | Automatic and manual with 6 ranges | |
| Geschwindigkeit | Langsam: 3 times/second; Schnell: 10 times/second | ||
| Result Display | Zeigen | ||
| Max Reading | 5000 | ||
| Adjustment | Short-circuit Zero-Adjust for each range | ||
| Komparator | OFF, PASS, HIGH, LOW | Keiner | |
| Piep | OK, NG, OFF | Keiner | |
| Messleitung | 4 terminal shielding(2 check terminal and 2 driving terminal) and external shielding ground section | ||
| Andere | LED-Anzeige | ||
| Anwendungen | Small diameter coil (headset coil); resistance of sensor;
Resistance test of protective device; ordinary transformer, inductor, motor, deflection coil winding resistance; all kinds of contact resistance; welding point contact resistance; mental defect detection |
||
| ALLGEMEINE MERKMALE | |||
| Stromversorgung | Stromspannung: 198V AC – 240V AC. Frequenz: 50Hz. Leistung: Max 15VA. Optional 110VAC | ||
| Größe | 220mm (Breite)x85mm (Height)x259mm (Tiefe), 2kg | ||
| ORDERING INFORMATION | |||
| Zubehörteil | ATL503: Kelvin test leads
Netzkabel |
||
