ISO 3104-2020: Methods of test for petroleum and its products – Petroleum products – Transparent and opaque liquids – Determination of kinematic viscosity
Ein Vorwort
ISO (Internationale Standardisierungsorganisation) ist eine globale Allianz nationaler Normungsgremien (ISO-Mitgliedsorganisationen). Die Entwicklung internationaler Standards erfolgt in der Regel durch technische Komitees der ISO. Jede Mitgliedsinstitution, die sich für ein Thema interessiert, zu dem ein Fachausschuss eingerichtet wurde, hat das Recht, im Ausschuss vertreten zu sein. An dieser Arbeit sind auch staatliche und nichtstaatliche internationale Organisationen beteiligt, die mit Standardisierungsorganisationen zusammenarbeiten. ISO arbeitet eng mit der International Electrotechnical Commission zusammen (IEC) in allen Fragen der elektrischen Normung.
Die zur Erstellung dieses Dokuments sowie zur weiteren Wartung verwendeten Verfahren werden im Teil beschrieben 1 der ISO/IEC-Richtlinie. Insbesondere, Es sollte auf die unterschiedlichen Genehmigungskriterien geachtet werden, die für verschiedene Arten von ISO-Dokumenten erforderlich sind. Dieses Dokument wurde in Übereinstimmung mit den redaktionellen Regeln von Teil erstellt 2 der ISO/IEC-Richtlinie (siehe iso.org/directives).
Bitte beachten Sie, dass bestimmte Inhalte dieses Dokuments möglicherweise Patentrechten unterliegen. ISO ist nicht dafür verantwortlich, einige oder alle dieser Patentrechte zu identifizieren. Einzelheiten zu etwaigen Patentrechten, die während der Entwicklung des Dokuments identifiziert wurden, finden Sie in der Einleitung und/oder in der ISO-Liste der eingegangenen Patentansprüche (see.iso.org/patents).
ISO 3104-2020: Methods of test for petroleum and its products – Petroleum products – Transparent and opaque liquids – Determination of kinematic viscosity
Alle in diesem Dokument verwendeten Handelsnamen dienen der Information des Benutzers und stellen keine Empfehlung dar.
Freiwillig, Verwandte Standards und Konformitätsbewertung verwandte ISO -spezifische und drücken die Bedeutung der Terminologie sowie in den relevanten technischen Hindernissen für den Handel aus ISO aus (TBT) Halten Sie sich an die Grundsätze der Welthandelsorganisation (WTO) Information, please refer to the iso.org/iso/foreword.html.
This document is prepared by Technical Committee ISO/TC 28, Petroleum and related products, fuels and lubricants of natural or synthetic origin.
The third edition cancels and replaces the second edition of the technical revision (ISO 3104:1994).
Verglichen mit der vorherigen Ausgabe, Die Hauptänderungen sind wie folgt:
– Accuracy data has been updated to all actual fuels in the market;
– Biodiesel (FAME) blends and paraffin diesel are included in the scope;
– Includes process description and permission for automation technology.
Feedback oder Fragen zu diesem Dokument sollten an die National Standards des Benutzers gerichtet werden. Eine vollständige Liste dieser Agenturen finden Sie unter iso.org/members.html.
ISO 3104-2020: Methods of test for petroleum and its products – Petroleum products – Transparent and opaque liquids – Determination of kinematic viscosity
Einführung
Many petroleum products and some non-petroleum materials are used as lubricants, and the proper operation of the equipment depends on the proper viscosity of the liquid used. Zusätzlich, the viscosity of many petroleum fuels is very important for estimating better storage, handling, and operating conditions. daher, the importance of accurate measurement of viscosity for many product specifications cannot be overstated.
Warnings This document is not intended to address all safety concerns, wenn überhaupt, mit seiner Verwendung verbunden. It is the responsibility of the user of this document to take appropriate steps to ensure the safety and health of personnel and to determine the applicability of any other restrictions before applying this document.
1 Umfang
This document specifies procedure A for the use of a manual glass visvisometer and procedure B for the use of a glass capillary visvisometer in an automated assembly to determine the kinematic viscosity ν of transparent and opaque liquid petroleum products by measuring the time of a given volume of liquid in a gravimetrically overcalibrated glass capillary visvisometer. The dynamic viscosity η is obtained by multiplying the measured kinematic viscosity by the density ρ of the liquid. The test method covers kinematic viscosity ranging from 0.2 mm2/s to 300 000 mm2/s over a temperature range from -20 °C to +150 °C.
Note that the results obtained from this document depend on the behavior of the sample and are intended to be applied to liquids where shear stress and shear rate are proportional (Newtonian flow behavior). Jedoch, if the viscosity varies significantly with the shear rate, different results can be obtained from viscometers with different capillary diameters. Program and precision values have been included for residual fuel oils, which in some cases exhibit non-Newtonian behavior.
ISO 3104-2020: Methods of test for petroleum and its products – Petroleum products – Transparent and opaque liquids – Determination of kinematic viscosity
2 Normative Verweisungen
Die folgenden Dokumente werden im Text so verwiesen, dass einige oder alle Inhalte die Anforderungen dieses Dokuments darstellen. Für datierte Referenzen, Es gilt ausschließlich die zitierte Fassung. Für undatierte Referenzen, die neue Version der Referenz (einschließlich etwaiger Überarbeitungen) gilt.
ISO 3105, glass capillary kinematic viscometers-Specifications and operating instructions
ISO 3696:1987, Analytical laboratory water use. Spezifikationen und Testmethoden
ASTM E1137, Standard specification for Industrial Platinum Resistance Thermometers
ASTM E2877, Standard Guide for Digital Contact Thermometers
ISO 3104-2020: Methods of test for petroleum and its products – Petroleum products – Transparent and opaque liquids – Determination of kinematic viscosity
3 Begriffe und Definitionen
Für die Zwecke dieses Dokuments, Die folgenden Begriffe und Definitionen gelten.
ISO und IEC unterhalten unter folgenden Adressen Terminologiedatenbanken zur Standardisierung:
– ISO Online -Browsing -Plattform: verfügbar unter iso.org/obp
– IEC Electronic Encyclopedia: Erhältlich unter Electropedia.org
3.1 Kinematic viscosity ν
The resistance of a fluid to flow under gravity
Bemerkung 1: For a gravity flow at a given static pressure head, the pressure head of a liquid is proportional to its density ρ. For any particular viscometer, the flow time of a fixed volume of fluid is proportional to its kinematic viscosity, ν :
ν = η/ρ
Notiz 2: where η is the dynamic viscosity coefficient.
3.2 Dynamic viscosity
Dynamic viscosity coefficient
Viscosity η
ISO 3104-2020: Methods of test for petroleum and its products – Petroleum products – Transparent and opaque liquids – Determination of kinematic viscosity
The ratio between the applied shear stress and the shear rate of the liquid
Notiz 1: It is a measure of resistance to liquid flow or deformation.
Bemerkung 2: The term dynamic viscosity is also used in different contexts to denote frequency-dependent quantities in which shear stress and shear rate have sinusoidal time dependence.
3.3 Density ρ
Mass per unit volume of material at a given temperature