Optický emisní spektrometr LR-8681
- Popis
- Poptávka
Popis
Optical Emission Spectrometer
Application Field
LR-8681 is a full-spectrum direct-reading inductively coupled plasma emission spectrometer for the determination of trace and trace elements in different substances (dissolved in nitric acid, hydrochloric acid, hydrofluoric acid, atd.). It is widely used in environmental protection, petroleum products, rare earth, semiconductor, geology, metallurgy, chemical industry, clinical medicine, jídlo, biological samples, criminal science, agricultural research and other fields.
Výkonové charakteristiky
Performance stability
The use of all-solid-state rf power supply, s malou velikostí, vysoká účinnost, stable output power, with a variety of protection
functions and many other advantages, the load using fully automatic matching technology, matching speed, improve the efficiency of the use of power supply and the stability of the instrument, and make the whole ignition process simple and convenient.
Adopting four-channel automatic design, the rotational speed can be set up according to the test demand to adjust the flow rate, carrier gas, plasma gas, auxiliary gas are all controlled by advanced mass flow controller, at the same time can be equipped with imported high salt nebulizer, imported hydrofluoric nebulizer and so on to meet the customer’s various test needs.
Precision analysis
The middle step grating prism cross dispersion mode is adopted, there is no moving optical element, the ultra low stray light design is combined with the unique optical design, nitrogen distributed blowing, imported optical elements, intelligent and accurate automatic wavelength calibration algorithm.
| circuit type | solid-state RF Power supply, with function of automatch |
| Frekvence | 27.12MHz±0.05% |
| Frequency Stability | <0.1% |
| Power Output: | 800W-1500W |
| Power Output Stability | <0.3% |
| Escaped RF radiation | 30cm away from the instrument, electric field: E<2V/m |
Sampling System Technical Parameter
| Output working coil inner diameter | 25mm |
| Torpue tube | Three concentric, external diameter 20mm |
| Coaxial nebulizer | Outer diameter 6mm |
| Double barrel atomizing chamber | Outer diameter 34mm |
Optical Emission Spectrometer Emission Spectrometer
| Plasma Argon Flowmeter | (100-1000)L/h(1.6-16L/min) |
| Auxiliary Argon Flowmeter | (100-1000)L/h(0.16-1.6L/min) |
| Auxiliary Carrier Argon Flowmeter | (100-1000)L/h(0.16-1.6L/min) |
| Pressure Maintaining Value | (0-0.4MPa) |
| Cooling Water | Teplota:Teplota:20-25℃,Rate of Flow>5L/min,Hydraulic Pressure>0.1MPa |
| Technical index of spectrometer | |
| Grating | Middle step grating,52.67 lp/mm,64 sparkle angle |
| Rozsah vlnových délek | 160-1000 nm. |
| Numerical aperture | F ≤ 8, ultra-high luminous flux to ensure the detection limit and sensitivity of the instrument |
| Rozlišení | < 0.0065nm@200nm |
| Astigmatism | Equivalent background concentration of 10000 ppm Ca solution at As189.042 nm <2 ppm●Light chamber:Precision constant teplota,35±0,1 °C,Distributed nitrogen purging, normal purging 1.8L/min, fast purging 3.8L/min |
| Testing device technical specifications | |
| Target Size | 27.6mm ×27.6mm,1024×1024 addressing detection units |
| Detektor | CID |
| Reading mode | Non-destructive read (NDRO), full reading (FF) and arbitrary read integral (RAI) |
Optical Emission Spectrometer
Standard Configuration List
| Standard parts | ||||
| Ne | Spare parts | qty | unit | notes |
| 1 | spectrophotometer | |||
| 1.1 | ICP8681 | 1 | soubor | Line grating 3600L/mm,2400L/mm |
| 2 | software | |||
| 2.1 | [ICP analysis software]V1.0 | 1 | soubor | CD with latest version |
| 2.2 | Záruční list | 1 | soubor | Angličtina |
| 2.3 | Quality card | 1 | soubor | Angličtina |
| 2.4 | USB Flash Drive | 1 | kus | |
| 3 | accessoris | |||
| 3.1 | Cable | 1 | čára | size 8Pin X L3M,RJ-45 |
| 3.2 | Plastic drum | 1 | kus | Volume 5L plastic:HDPE semi-transparency,white color with white cover,deltoid |
| 3.3 | Argon pressure reducing valve | 2 | kus | v:0～25MPa,Out:0～0.4MPa innerG5/8 outter M16×1.5RHM152IN-40 |
| 3.4 | PU tube | 30 | meter | 10×6.5×1.75mm |
| 3.5 | PU tube | 5 | meter | 6×4×1mm |
| 3.6 | PVC transparent tube | 1 | meter | 8mm×6mm |
| 3.7 | plug | 2 | kus | 10A250V |
| 3.8 | Ground copper braided wire | 15 | meter | sectional area:4mm2 |
| 3.9 | Brass tube | 1 | kus | Size 48,thin 3,L:500 |
| 3.10 | Filter element of filter tank | 4 | kus | outter:60mm, inner:28mm, L:125mm |
| 3.11 | Torch pipe | 2 | kus | |
| 3.12 | Double cylinder atomizing chamber | 2 | kus | |
| 3.13 | atomizer | 1 | kus | |
| 3.14 | Capillary tube | 0.5 | meter | D=2.38mm,d=0.8mm |
| 3.15 | Pump head hose of Peristaltic Pump | 3 | čára | Ф1.65 L45cm tygon-R-3607（2S） |
| 3.16 | Electronic Fuses | 2 | čára | 10A,250PROTI,6×30mm |
| 3.17 | Electronic Fuses | 2 | čára | 6.3A,250PROTI,5×20mm |
| 3.18 | Cylindric atomizer | 2 | kus | PTFE |
| 3.19 | Silicone tube | 0.3 | meter | Inner 2mm,outer 4mm,tvrdost:55HRC |
| 3.20 | Hose adapter | 4 | kus | ZCJH-2*6 INNER 6-2 |
| 3.21 | Hose adapter | 4 | kus | ZC-1/16*3/32 INNER 1.6-2.4 |
| 3.22 | Spherical connector clamp | 1 | P | L00091181,Ф=10 |
| 3.23 | O shape seal ring | 2 | P | 32.5×3.55 |
| 3.24 | O shape seal ring | 4 | P | 5.6×1.8 |
| 3.25 | Quick Connector | 2 | P | Φ6 |
| 3.26 | Raw material belt | 1 | roll | 26mm×20m,thin:0.1～0.2mm |
| 3.27 | ribbon | 30 | čára | Size 4X200 |
| 3.28 | toolkit | 1 | soubor | Self-made |
| 4 | Standard instrument | |||
| 4.1 | počítač | 1 | soubor | Lenovo |
| 4.2 | displayer | 1 | soubor | Lenovo |
| 4.3 | Canon Printer | 1 | soubor | Laser printer |
| 4.4 | cooling water tank | 1 | soubor | refrigerating capacity:2000W |
| 4.5 | stabilized voltage supply | 1 | soubor | 10kVA |
| 5 | Packing material | |||
| 5.1 | ICP6800 wood carton | 1 | soubor | |
| 5.2 | screw | 5 | P | M5×8 |
