Tester produktů rozkladu plynu KGFJ-4 SF6
- Popis
- Poptávka
Popis
Tester produktů rozkladu plynu KGFJ-4 SF6
Představení produktu
The faults of SF6 electrical equipment are divided into internal faults and operating mechanism faults. The internal faults involving solid insulation pose the greatest threat to the safety of the equipment. The internal faults can be divided into two categories: discharge and overheating. The discharge faults can be divided into suspension potential discharge, ground discharge and interturn discharge.
V současnosti, the electrical tests commonly used at home and abroad are generally carried out in the state of power failure, and the detection rate of the insulation that endangers the safety is very low. The KDFJ-4 decomposition product tester produced by our company is an intelligent instrument with high sensitivity, stability and convenient operation. It can automatically diagnose and put forward treatment suggestions according to the detected concentration, providing a simple and effective means for early detection of internal faults of SF6 electrical equipment.
Tester produktů rozkladu plynu KGFJ-4 SF6
Parametr
| H2S | rozsah měření | 0~200ppm |
| Minimum detection amount | ≤0.1ppm | |
| stupeň přesnosti | ±0,5 % | |
| SO2 | rozsah měření | 0~200ppm |
| opakovatelnost | ≤2% | |
| stupeň přesnosti | ±0,5 % | |
| CO | Minimum detection amount | ≤0.1ppm |
| stupeň přesnosti | ±0,5 % | |
| stupeň přesnosti | ≤2% | |
| rozsah měření | 0~1000ppm | |
| HF（optional） | Minimum detection amount | ≤1ppm |
| stupeň přesnosti | ±0,5 % | |
| opakovatelnost | ≤2% | |
| range of measurement | 0~10ppm | |
| teplota prostředí | －40℃～＋60℃ | |
| ambient humidity | 0～100％ RH | |
| zdroj napájení | AC 100～240V 50/60Hz | |
| Built-in rechargeable battery | ||
| zdroj napájení | Charging time: 10 hodin; Use time is more than 12 hodin. | |
| Provozní teplota | －30℃～＋70℃ | |
| velikost | 280×150×300 mm | |
| Hmotnost | 5kG | |
Tester produktů rozkladu plynu KGFJ-4 SF6
Vlastnosti produktu
1, using anti-cross interference technology, vysoká přesnost, good repeatability
2, with the environment temperature dynamic compensation function
3, built-in imported electronic mass flowmeter can accurately control the gas flow
4, fast gas saving: after the boot enters the measurement state, the determination time of each decomposition is less than 2 min.
5, optional equipped with pipeline cleaning device, automatic cleaning of the internal pipeline after testing, improve the test speed and accuracy
6, self-locking joint: the original imported self-locking joint, bezpečné a spolehlivé, no air leakage.
7, graphical operation interface, more convenient to use
8, built-in large capacity rechargeable lithium battery, a charge can work for more than 10 hodin.
