Digitální ultrazvukový defektoskop GA-9101
- Popis
- Poptávka
Popis
Digitální ultrazvukový defektoskop
1.Úvod
Digitální ultrazvukový defektoskop je pokročilý typ,, může rychle, snadno a bez poškození, přesně detekovat, lokalizovat, vyhodnocovat a diagnostikovat různé vady uvnitř obrobku, jako jsou praskliny, svary, póry, pískové díry, inkluze, skládací, atd. Bylo použito pro elektrickou energii, petrochemický, kotel a tlaková nádoba, ocelová struktura, válečný, kosmonautika, železniční doprava, automobil, strojírenství a další obory. Je to základní nástroj pro průmysl nedestruktivního testování.
Digitální ultrazvukový defektoskop
2.Funkce
- Measurement display mode: positive wave,negative wave,full wave and wave ;
- It has a linear suppression function, the maximum inhibition is 80% of the screen height;
- It can switch between single crystal probe, double crystal probe and two inspection modes;
- It has a gate setting and alarm function. The position and width of the gate can be arbitrarily set on the screen, and an incoming wave alarm can be set;
- 500 independent detection channels, each channel set a separate set of testing parameters, DAC curve;
- Two display modes with angle and K value;
- The DAC curve is generated automatically, and up to 10 points can be recorded, with four additional adjustable offset curves;
- AVG curve is generated automatically, and two types of defects can be customized;
- Automatic probe calibration function;
- With storage function, it can store 100 A sweep patterns, parameters and DAC curve;
- Has a storage graphics playback function, the stored A-scan graphics from the storage area and displayed on the screen;
- Has a delete function to delete the specified content (represented by the storage group number) from the storage area;
- Peak memory function;
- Freeze and thaw functions with waveform and inspection parameters;
- With sound path measurement and echo frequency analysis function;
- Real-time power status indication function;
- Support USBcommunication interface;
- Li-battery, low power consumption, can continuous working more than ten hours
- Can set up buzzer alarm during operation
- Light, Pohodlné, snadné ovládání
Digitální ultrazvukový defektoskop
3.Technical Specifications
| název | Technická data |
| Scan range (mm) | Scan range (mm):0~10000
Grades: 2.5,5,10,20, 30,40,50,60,70,80,90, 100,150,200, 250, 300, 350, 400, 450,500,600,700,800,900,1000,2000,3000,4000,5000,6000,7000,8000,9000, 10000. Adjusting step distance: 1mm |
| Pulse shift ( slečna ) | Pulse shift ( slečna ): -7na +9984
Grades: -20, -10, 0.0, 10, 20, 50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700,800,900,1000,1500,2000,2500,3000,3400. Adjustment step:1（-7ms~9984ms） |
| Probe zero point(slečna) | Probe zero point：0.0~99.99
Adjust the step：0.01 |
| Material sound speed(paní) | Material sound speed:1000~15000
7 fixed sound speeds:2260,2730,3080,3230,4700,5900,6300 Adjust the step:1 |
| Working methods | Single probe (receive and send), dual probes (one for receiving one for sending) |
| Frekvenční rozsah(MHz) | 0.5~20 |
| Gain adjustment(dB) | 0~120
Adjust the step:0.2,1,2,4,6,8,10,20,50 |
| Linear inhibition | Screen height 0% na 80%, step size: 1% |
| Vertikální chyba linearity | Vertical linear error, not more than 3% |
| Horizontal linear error | Within the scan range, not more than 0.2% |
| Flaw detection sensitivity margin | ³62dB |
| Dynamic Range | ³32dB |
| Poplach | Incoming wave alarm |
| Zobrazit obrazovku | Zobrazit:
High-brightness color 5.7 in display |
| A-Scan display area | Full screen or local
A-Scan shows freeze and thaw A-Scan fills |
| Flaw detection channel | 300 |
| Datové úložiště | 500 A-Scan graphics |
| PC communication interface standard | USB |
| Units of measurement | Mm |
| Power Adapter | enter 100V~240V/50Hz~60Hz
Output 9V/1.5A |
| Baterie | Lithium (Li) Battery 5000mAh |
| Pracovní teplota (°C) | -10~50°C |
| Pracující vlhkost (RH) | 20%~90% |
| Interface Type | BNC |
| Rozměry (mm) | 220*140*50 |
| Hmotnost(kg) | 1.0 |
Digitální ultrazvukový defektoskop
Standard Configuration
|
|
název | MNOŽSTVÍ |
| 1 | Hlavní jednotka | 1 |
| 2 | Přímá sonda | 1 |
| 3 | Úhlová sonda | 1 |
| 4 | propojovací kabel sondy | 2 |
| 5 | Napájecí adaptér | 1 |
| 6 | Záruční list | 1 |
| 7 | Product Certificate | 1 |
| 8 | Návod k použití | 1 |
| 9 | Software | 1 |
| 10 | Pouzdro na přístroj | 1 |
