GA-1805 Roundness Measuring Instrument

Popis

Roundness Measuring Instrument

Úvod:

The GA-1805 roundness measuring instrument adopt high rigidity precision air bearings as measurement datum, which is high precision and long service life. The electrical control system adopt modular, high-precision data acquisition and processing system, vysoká přesnost, low failure rate and easy maintenance.

Roundness Measuring Instrument

Technical feature:

*High precision desktop roundness, integrated design, saves space;

*Adopt gas spindle: Maintain long-term accuracy, dobrá stabilita;

*Self-developed software, module design decrease which decrease the users maintenance cost;

* PC configuration is flexible, it can be configured according to user requirements;

* Software aided self-aligning leveling, improve efficiency and save time.

* Standard report is equipped with a variety of evaluation method, the parameters in column test report can be add or delete according to the users requirement;

* Measurement results can choose ISO statistics or ISO standard reports;

* Commutator module for optional;

* Software support XP、win7、win8 system, Chinese and English language.

Roundness Measuring Instrument

Specifikace

Položka		Parametr
Rotary table	Bearing Type	Gas bearing
	Rotation accuracy	(0.025+6H/10000)μm
	Rotating speed	6ot./min
	Adjust table diameter	180mm
	Table loading capacity	15kg
	Rotation diameter	320mm
	Max measure diameter	250mm
	Min measure inner diameter	1mm probe (Volitelný)
Column (Z-axis )	Column transverse travel	420mm
	Max detection depth	100mm (min inner diameter): 30mm)
horizontal arm (X-axis)	Horizontal movement	100mm
	Protrusion amount	25mm
Detektor	Acquisition device	Circle grating
	Circumference of sampling points	4096 body
	Sensor type	Inductive Sensor
	Sensor range	±300μm
	Sensor resolution	0.01μm

Roundness Measuring Instrument

Measurement Capability:

Evaluation item: Roundness, concentricity, flatness,Single radial runout

Analytical ability:

Spectrum analysis, gap/burr automatically removed, waveform analysis

Roundness evaluation (4 methods): Minimum zone method, least square, minimum circum circle and maximum inscribed circle

Roundness filtering gear: 1-15upr,1-50upr,1-150upr,1-250upr,1-500upr,15-100upr,15-500upr,2-15upr

Filtering expression: Gaussian (ISO standard)

Operational environment:

Vibration source：Without vibration source

Napájení：AC 220V±10% 50Hz Separate ground

Teplota：in site temperature：12℃—26℃ ideal temperature 20±2℃

Relate humidity：＜85%

Air supply：Air compressor air pressure：0.5-0.8Mpa

Air compressor air flow：≧0.2m³/min

Air pressure dew point at instrument inlet ≤10℃

Oil mist detector ≤0.5mg/m³,SOLID ≤3um

Content of solid particles ≤5mg/m³