- Popis
- Poptávka
Popis
Ohm Meter
Stručný úvod
AT2511 is the upgrade version of AT511A, is a resistance meter with high-cost performance and small volume, which can measure 10μΩ – 200kΩ, max reading 5000 dgt.It is quite suitable for resistance measurement under low power conditions or factory inspection and product sorting based on its sorting function.
Ohm Meter
Technický parametr
| SPECIFIKACE | |||
|
AT2511 |
AT511C (discontinued) |
||
| Parametr |
DC resistance |
||
| Základní přesnost | 0.2% | 0.3% | |
| Rozsah měření | 10mΩ~200.0kW | 0.1mW~50.00kW | |
| Zdroj signálu | já – Max: < 100mA | ||
| Rozsah | Automatické i manuální s 8 rozsahy | Automatické i manuální s 6 rozsahy | |
| Rychlost | Pomalý: 3 krát/sekundu; Rychle: 10 krát/sekundu | ||
| Zobrazení výsledku | Ukázat | ||
| Max Reading | 5000 | ||
| Nastavení | Short-circuit Zero-Adjust for each range | ||
| Komparátor | OFF, PASS, HIGH, LOW | None | |
| Beep | OK, NG, OFF | None | |
| Test Lead | 4 terminal shielding(2 check terminal and 2 driving terminal) and external shielding ground section | ||
| Ostatní | LED display | ||
| Aplikace | Small diameter coil (headset coil); resistance of sensor;
Resistance test of protective device; ordinary transformer, inductor, motor, deflection coil winding resistance; all kinds of contact resistance; welding point contact resistance; mental defect detection |
||
| OBECNÉ RYSY | |||
| Zdroj napájení | Napětí: 198V AC – 240V AC. Frekvence: 50Hz. Napájení: Max 15VA. Optional 110VAC | ||
| Velikost | 220mm (Šířka)x85mm (Výška)x259mm (Hloubka), 2kg | ||
| OBJEDNÁVKA INFORMACE | |||
| Accessory | ATL503: Kelvin test leads
AC napájecí kabel |
||
