Operating rules for thermal conductivity detector

Thermal conductivity tester is an instrument that measures the thermal conductivity of a sample (solidní, liquid or powder) as a function of temperature. DZDR-S thermal conductivity detector adopts the transient plate method, which can measure the thermal conductivity of bulk solid, paste solid, granular solid, colloid, kapalina, prášek, povlak, film, insulation material and other materials. Compared with other test methods, the transient plate method can directly obtain the thermal conductivity and thermal diffusion, and there is no special requirement for the sample, and the measurement speed is fast, and the results can be obtained within 5~160S, which greatly improves the efficiency of the experiment.

Operating rules for thermal conductivity detector

What are the operating procedures of thermal conductivity detector?

DZDR-S thermal conductivity detector is equipped with a sample rack, a number of probes, operating software, atd., the probe and the sample are fully in contact, if it is a powder sample, can be placed in the specified container, measurement, and then connected to the instrument, through the setting of the instrument coefficient, and then test. The instrument is equipped with special test software, which can directly test the thermal conductivity of different materials, and the two-way control system operation is convenient and fast.