- Описание
- Разследване
Описание
VDT-S10 Cycle Drop Generator
Описание на продукта
Voltage sags, short interruptions are caused by sudden changes in power grid, power facility failures or loads. In some cases there will be two or more consecutive rollovers or interrupts. The voltage change is caused by a continuous change in the load connected to the grid. If the EUT on the power supply voltage changes cannot respond in a timely manner, it may lead to failure. The voltage drop generator is used to evaluate the performance of electrical and electronic equipment when subjected to voltage sags, short interruptions, and voltage changes. Products fully meet the latest requirements of IEC/ EN 61000-4-11.
VDT-S10 Cycle Drop Generator
Характеристика
- Fully Compliant with latest Standards IEC/ EN 61000-4-11
- Потребителски дисплей 7 ”сензорен панел
- Подкрепете многоезични & улесняват потребителите
- Вградена програма за самотест на околната среда
- Програмируема операция
- Pre-programmed IEC 61000-4-11 test settings
- RS232 интерфейс, Операция за управление на компютър & printable test report
- Comfortable use and convenient operation
VDT-S10 Cycle Drop Generator
Technical data
| Модел | VDT S10 |
|
Волтаж |
1~80V |
|
Voltage variation range |
0~120% |
| Voltage change duration | 1~ 9999 half cycle |
| Switching phase | 0~ 359°synchronous, asynchronous, or automatic |
| Built-in standard test grade | 0, 40%, 70%, 80% |
| Jump time | 1μs~ 5μs |
| Voltage changes in the number of repeat | 1~ 9999 |
| Interval cycle of voltage variation | 1~ 9999 half cycle |
| Drop mode | Set at random |
| EUT capacity | 1 phase, 10А |
| Захранване | AC220V 50/60Hz |
| Температура на околната среда | 15℃~ 35℃ |
