Описание

Impedance Analyzer

Кратко въведение

TH2838/TH2838H/TH2838A is a new generation impedance tester adopting the most advanced auto balance bridge theory in the world at present. With its 0.05% basic accuracy, speed up to 5.6ms, 20Hz-2MHz frequency range and impedance test range up to 1GΩ, this new impedance tester can meet all test demands of components and materials, especially for testing capacitor with low D and inductor with high Q. Four-terminal pair configuration can eliminate the effect of electromagnetic coupling in test cable, to extend the low limit of low impedance test 10 times than those testers with Five-pair configuration. TH2838/TH2838H/TH2838A supports 20V AC test signal and 40V DC Bias, new-added improved multi parameter list sweep/graphic analyze will help customers to extend the comprehensive evaluation ability on components. TH2838/TH2838H/TH2838A is a strong tool for the design, examination, quality control and production test of electronic components. Its excellent performances and functions provide a powerful tool for circuit design and development, as well as material (electronic material and non-electronic material) research and development. TH2838/TH2838H/TH2838A can realize various tests of commercial standards and military standards, such as IEC and MIL.

Impedance Analyzer

Модел TH2838
Test Signal Source
Изходен импеданс 100о, ±1% @1kHz
Честота Обхват 20Hz-2MHz
Резолюция 20.0000Hz – 99.9999Hz 0.1mHz
100.000Hz – 999.999Hz 1mHz
1.00000kHz – 9.99999kHz 10mHz
10.0000kHz – 99.9999kHz 0.1Hz
100.000kHz – 999.999kHz 1Hz
1.00000MHz – 2.00000MHz 10Hz
AC test signal Номинална стойност(ALC OFF):Set the voltage as the Hcur voltage when the test terminal is open Set the current as the Hcur current when the test terminal is short Constant value(ALC ON):Keep the voltage in DUT is the same as the set valueKeep the current in DUT is the same as the set value
AC signal Voltage range 5mVrms — 2Vrms
Резолюция 5mVrms — 0.2Vrms 100μVrms
0.2Vrms — 0.5Vrms 200μVrms
0.5Vrms — 1Vrms 500μVrms
1Vrms — 2Vrms 1mVrms
2Vrms — 5Vrms 2mVrms
5Vrms — 10Vrms 5mVrms
10Vrms — 20Vrms 10mVrms
Current range 50μArms — 20mArms
Резолюция 50μArms — 2mArms 1 μArms
2mArms — 5mArms 2 μArms
5mArms — 10mArms 5 μArms
10mArms — 20mArms 10μArms
20mArms — 50mArms 20μArms
50mArms–100mArms 50μArms
Rdc test Voltage range 100mV — 2V
Резолюция 100μV
Current range 0mA— 20mA
Резолюция 1μA
DC Bias Voltage range 0V — ± 10V
Резолюция 0V — 5V 100μV
5V — 10V 1mV
Current range 0mA— ± 100mA
Резолюция 0 А — 50mA 1μA
50mA — 100mA 10μA
Дисплей
Size/Type 7-инч (diagonal)TFT LCD дисплей
Proportion 16:9
Резолюция 800×RGB×480
Test function
Test parameter Cp-D,Cp-Q,Cp-G,Cp-RpCs-D,Cs-Q,Cs-RsLp-D, Lp-Q, Lp-G, Lp-Rp, Lp-RdcLs-D, Ls-Q, Ls-Rs, Ls-Rdc, RdcR-X, Z-θd, Z-θrG-B, Y-θd, Y-θrVdc-Idc
Mathematics function А(X+B)+° С, X is test parameter, А, б,C is input parameter
Equivalent circuit Серия, паралелен
Deviation measurement Absolute deviation Δ compared with the nominal valuePercentage deviation Δ% compared with the nominal value
Функция за калибриране OPEN, SHORT, LOAD
Range selection AUTO, HOLD
Обхват LCR 100mΩ, 1о, 10о, 20о, 50о, 100о, 200о, 500о, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ, 50kΩ, 100kΩ, total 15 ranges
RDC 1о, 10о, 20о, 50о, 100о, 200о, 500о, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ, 50kΩ, 100kΩ, total 15 ranges
Режим на задействане INT, MAN, EXT, АВТОБУС
Trigger delay 0 с — 999 с, resolution 100us

Impedance Analyzer Impedance Analyzer Impedance Analyzer