Описание

KGFJ-4 SF6 газов тестер за разлагане на газ

представяне на продукт
The faults of SF6 electrical equipment are divided into internal faults and operating mechanism faults. The internal faults involving solid insulation pose the greatest threat to the safety of the equipment. The internal faults can be divided into two categories: discharge and overheating. The discharge faults can be divided into suspension potential discharge, ground discharge and interturn discharge.
At present, the electrical tests commonly used at home and abroad are generally carried out in the state of power failure, and the detection rate of the insulation that endangers the safety is very low. The KDFJ-4 decomposition product tester produced by our company is an intelligent instrument with high sensitivity, stability and convenient operation. It can automatically diagnose and put forward treatment suggestions according to the detected concentration, providing a simple and effective means for early detection of internal faults of SF6 electrical equipment.

 

KGFJ-4 SF6 газов тестер за разлагане на газ

Параметър

H2S обхват на измерване 0~200ppm
Minimum detection amount ≤0.1ppm
degree of accuracy ±0,5%
SO2 обхват на измерване 0~200ppm
повторяемост ≤2%
degree of accuracy ±0,5%
CO Minimum detection amount ≤0.1ppm
degree of accuracy ±0,5%
degree of accuracy ≤2%
обхват на измерване 0~1000ppm
HF(optional) Minimum detection amount ≤1ppm
degree of accuracy ±0,5%
повторяемост ≤2%
range of measurement 0~10ppm
environment temperature -40℃~+60℃
околна влажност 0~100% RH
захранване AC 100~240V 50/60Hz
Built-in rechargeable battery
захранване Charging time: 10 часа; Use time is more than 12 часа.
operating temperature -30℃~+70℃
размер 280×150×300 mm
Тегло 5kG

 

KGFJ-4 SF6 газов тестер за разлагане на газ

Характеристики на продукта
1, using anti-cross interference technology, висока точност, добра повторяемост
2, with the environment temperature dynamic compensation function
3, built-in imported electronic mass flowmeter can accurately control the gas flow
4, fast gas saving: after the boot enters the measurement state, the determination time of each decomposition is less than 2 мин.
5, optional equipped with pipeline cleaning device, automatic cleaning of the internal pipeline after testing, improve the test speed and accuracy
6, self-locking joint: the original imported self-locking joint, безопасен и надежден, no air leakage.
7, graphical operation interface, more convenient to use
8, built-in large capacity rechargeable lithium battery, a charge can work for more than 10 часа.