Тестер за механични характеристики на превключвател KDGK-II
- Описание
- Разследване
Описание
Switch Mechanical Characteristics Tester
KDGK-II high voltage switch mechanical characteristics tester can be used for various voltage levels of vacuum, sulfur hexafluoride, less oil, more oil and other power system high voltage switch mechanical characteristics parameters test and measurement. The measurement data is stable, strong anti-interference, can be tested in 500KV grade and below power stations, convenient wiring, проста операция, is the most convenient tool for high-voltage switch maintenance test.
Switch Mechanical Characteristics Tester
Характеристики на продукта
1, the instrument can automatically identify the breaking and closing state, and according to the reference fracture state prompts the corresponding closing and parting operation.
2, independent 12 fracture, can detect and prompt the connection status of the fracture, convenient for users to check the
connection.
3, the machine can store 50 groups of test results.
4, large screen LCD (320×240) LCD дисплей, advanced gray screen, no reflection in the sun no black screen, graphic and Chinese menu operation tips, humanized menu interface, лесен за работа.
5, the instrument has a powerful graphic analysis function, to achieve waveform and measurement processing data on the same screen display, so that the test process is more intuitive.
6, the machine has a delay protection function, the circuit breaker can automatically cut off the coil voltage after the action, a good protection of the circuit breaker and testing instruments.
7, this instrument can be electric and manual closing test.
8, can carry out high and low voltage experiment, automatically find the lowest point or closing voltage.
9, reclosing test, can do the closing, closing, closing and other parameters measurement.
10, vacuum contactor (single coil) parameter measurement.
1, the instrument can automatically identify the breaking and closing state, and according to the reference fracture state prompts the corresponding closing and parting operation.
2, independent 12 fracture, can detect and prompt the connection status of the fracture, convenient for users to check the
connection.
3, the machine can store 50 groups of test results.
4, large screen LCD (320×240) LCD дисплей, advanced gray screen, no reflection in the sun no black screen, graphic and Chinese menu operation tips, humanized menu interface, лесен за работа.
5, the instrument has a powerful graphic analysis function, to achieve waveform and measurement processing data on the same screen display, so that the test process is more intuitive.
6, the machine has a delay protection function, the circuit breaker can automatically cut off the coil voltage after the action, a good protection of the circuit breaker and testing instruments.
7, this instrument can be electric and manual closing test.
8, can carry out high and low voltage experiment, automatically find the lowest point or closing voltage.
9, reclosing test, can do the closing, closing, closing and other parameters measurement.
10, vacuum contactor (single coil) parameter measurement.
Switch Mechanical Characteristics Tester
| Time measurement | 12 канали
Inherent opening (closing) време
Different phases in the opening (closing) phase Switching (closing) phase is different Closing (opening) bounce time (number of bounces) |
| Test range | 0.01ms ~ 10000ms
ccuracy: 0.1%±2 words within 1ms ~ 100ms, greater than 100ms accuracy 0.5%±2 words
Speed measurement: just-minutes (just-in) speed The average speed of a specified period of time (stroke or Angle) Speed measurement range: 1mm sensor 0.01 ~ 25.00m/s, 0.1mm sensor 0.001 ~ 2.50m/s, 360° Angle sensor 0.01 ~ 25.00m/s Universal sensor: 0.01 ~ 10.00m/s |
| stroke measurement | moving contact stroke (инсулт) Contact stroke Overshoot or reverse |
| sensor measurement range | linear displacement sensor 50mm, резолюция :0.1мм, travel 0.1 ~ 50mm Linear displacement sensor 300mm, резолюция :0.1мм, travel 10 ~ 300mm (по желание) Linear displacement sensor 500mm, резолюция :1мм, travel 10 ~ 500mm (по желание) 360-wire sensor: 360, резолюция :0.25, travel 1mm ~ 1000mm |
| current measurement | The display current is the maximum current value of the split (close) gate coil |
| дисплей | 320×240 LCD screen, contrast is adjustable |
| хранилище за данни | can store 100 groups of measurement data |
| принтер | high-speed thermal printer |
| instrument power supply | AC/DC 220V ± 10%; 50Hz ± 2% |
| DC power supply | output voltage: 25 ~ 265V continuous adjustable, output current: ≤ 15A(short time) |
| host volume | 360×250×140mm |
| use environment | -10℃~+50℃ |
| relative humidity | ≤90% |
