GA-6041 Coating Film Pendulum Hardness Tester

Описание

Pendulum Hardness Tester

Тест standards:

GB/ t1730-88 (method A), iso1522-73, DIN53157, ASTMD4366

Pendulum Hardness Tester

Резюме:

Pendulum hardness test is one of the international methods for hardness test in coating industry.It is designed according to GB/T 1730-93 and ISO 1522.According to the form of pendulum, it can be divided into double pendulum QBY type and single pendulum QHD type.

The two stainless steel balls on the pendulum hardness tester are supported on the dried coating and swing with a certain period. If the coating surface is softer, the pendulum amplitude attenuation of the pendulum is faster (shown in the pendulum amplitude attenuation from 6 да се 3 swing time is shorter).Напротив, the harder the coating surface is, the slower the amplitude attenuation will be.QHD pendulum damping tester is also called konig pendulum. Hardness is expressed by damping time, това е, the product of the number of swings of the pendulum at a specified Angle and the swing period.

Забележка: in order to obtain a reliable test data, the test should be carried out under the condition of controlled temperature and humidity without airflow influence, and the film thickness and substrate material can also affect the damping time.

Pendulum Hardness Tester

технически параметри:

Weight of swing bar: 200 ±0.2g

Diameter of steel ball: 5мм (0.2в)

Swing rod length: 500 ±1 mm

Automatic counting function

Initial swing Angle: 6º

End swing Angle: 3º

Oscillation period: 1.4с

Swing time on the glass plate: 250 ±10s

Timing range: 999.9с

Габаритни размери: 430*330* 650 мм

Забележка: k-type pendulum