GA-1014 Малка машина за вулканизиране на плочи

Описание

Малка машина за вулканизиране на плочи

Преглед

This series of plate vulcanizing machine is used for pressing all kinds of rubber model products and non-model products, and also can be used for pressing all kinds of thermosetting plastics and foaming rubber and plastic products.With independent power mechanism and electrical system, using the button control.Working pressure and heating temperature can be adjusted within a certain range.This machine is divided into two types: manual and semi-automatic

Малка машина за вулканизиране на плочи

Приложна индустрия

Laboratory small plate vulcanizing machine is also called hot press molding machine, mainly used for rubber, plastic products sample making experiments, като: tensile test, impact test, compression test sample preparation.

Plastic industry: laboratory sample making, small batch trial production, research and development,PPT,PE,PVC and so on.

Rubber industry: laboratory sample making, small batch trial production, research and development, natural rubber, silicone, silicone rubber, и т.н.

Малка машина за вулканизиране на плочи

технически параметри

1, капацитет: 5-30ton adjustable [with automatic exhaust function]

2, температурен диапазон: normal temperature ~ 300℃

3, temperature accuracy: ±1.5℃

3, Temperature controller: PLC touch screen

4, temperature control mode: PLC touch screen

5, heater: electric heat pipe heating

6, Режим на работа: electric heating.Heating mode: електрическо отопление.

7, heating time: room temperature ~ 160℃ about 15min

8, timer: PLC display, 0.01s ~ 999min ~ 999hr (регулируема)

9, two layer hot pressing plate: 350×350mm (high hardness steel plate with special treatment) електрическо отопление.

10, exhaust function: low pressure automatic exhaust a minute 3 ~ 10 times adjustable

11, hydraulic system: proportional hydraulic flow closed loop control system, GPY oil pump (Japanese) drive high performance electric hydraulic with high precision of the resistance of cylinder piston implementation such as speed control mode (travel height can be set in a single freedom) with automatic pressure compensation function, pressure time can be preset, load power, steady lifting, automatic pressure, налягане, pressure relief

12, cylinder stroke: Max 300mm

13, cylinder speed: 11mm/s

14, манометър: 0 ~ 200kg/sq.cm

15, volume :(W×D×H)1600×650×1560 mm

16. Източник на захранване: 3∮, AC380V, 15А

17, тегло: about 720kg