Цифров мостов измервателен уред Anbai AT2811
- Описание
- Разследване
Описание
Digital Bridge Meter
Descriptions
AT810D/AT2811 digital LCR meteriscreated as the smallest bench-type digital meter, this depends on Applentprofessional intelligent instrument technology. Four grades of test frequency: 100Hz, 120Hz, 1kHz, 10kHz; 6 параметри (Л, ° С, Р, З, д, Q) can be tested and the built-in comparator caneasily deal with the sorting operation of components which made AT2811 high cost-performance.
Digital Bridge Meter
Технически параметър
| SPECIFICATIONS | |||
|
AT810D Digital LCR Meter |
AT2811 Digital LCR Meter promotion |
||
| Параметри | Л,° С,Р,З,д,Q,i(deg),i(rad) | Л,° С,Р,|З|,д,Q | |
| Основна точност | 0.2% | 0.25% | |
| Честота | 100Hz, 120Hz, 1kHz, 10kHz | 100Hz, 120Hz, 1kHz, 10kHz | |
| Обхват на дисплея | Л: 0.01μH-9999H C: 0.01pF-9999μF
Р,З:0.0001Ω-99.99MΩΔ%: -9999% – 9999%д: 0.0001 – 9.9999Q:0.0001-9999 |
Л: 0.01mH-9999H C: 0.01pF-9999mF
д: 0.0001–9.999 Q: 0.0001–999.9 Р,З: 0.0001У – 99.99MW |
|
| Max Reading | Principle parameter: 99999 sub parameter: 99999 | ||
| Source Resistance | 30W and 100W | ||
| Обхват | Automatic and manual with 6 ranges | ||
| Signal Level | 0.1Vrms, 0.3Vrms and 1Vrms | ||
| Скорост | 2 пъти/секунда, 5 пъти/секунда | Бавен: 3 пъти/секунда, Бърз: 10 пъти/секунда | |
| Еквивалентна схема | In series and parallel | ||
| Result Display | Покажи & sorting results | ||
| Adjustment | Short and open sweep frequency correction | ||
| Компаратор | 5-bin sorting | ||
| защита | 1000V/10mF,600V/80mF or 400V/150mF capacitance electrify protection | None | |
| Интерфейс | Optional RS232 | None | |
| Beep | P1, P2, P3, NG, OFF | ||
| други | VFD display, keypad lock and data hold function | LCR automatic parameter select, LED display | |
| GENERAL FEATURES | |||
| Захранване | Волтаж: 198V AC – 240V AC, Честота: 50Hz, Мощност: Max 15VA | ||
| Размер | 264мм(ширина)x107mm(Височина)x350mm(Depth) 4килограма | 220мм (ширина)x85mm (Височина)x259mm (Depth); 2килограма | |
| ORDERING INFORMATION | |||
| Accessory | ATL501: Test cableATL601: Test fixture
ATL600: Short-circuit device Не е задължително: ATL608 SMD patch clamp ATL508: SMD patch test clip |
ATL501: Kelvin Test clip; AC power cord | |
