GA-S100 Akron Abrasion Tester

وصف

GA-S100 Akron Abrasion Tester

Instrument Application:

Used to determine the abrasion resistance of vulcanized rubber. The test sample is rubbed against a grinding wheel at a specific angle and under a specific load, and the wear volume of the sample over a certain distance is measured.

GA-S100 Akron Abrasion Tester

المعايير:

جيجابايت/ت 1689, بكالوريوس 903, JIS K6264, CNS 734

GA-S100 Akron Abrasion Tester

المواصفات الفنية:

1. Grinding wheel specifications: Grinding wheel diameter: 68±1mm, thickness: 12.7مم ± 0.2 مم, صلابة: 75~80 degrees (Shore A), center hole diameter: 12.7مم
2. Test sample: Strip shape, length (D+2h)πmm, عرض: 12.7مم ± 0.2 مم, thickness: 3.2مم ± 0.2 مم.
ملحوظة: D is the grinding wheel diameter, h is the test sample thickness, and π is pi.
3. Sample shaft rotation speed: 76±2 rpm (GB standard); 250±5 rpm (BS standard)
4. Sample tilt angle range: 0°~45°
5. Load: 26.7±0.2 N
6. Grinding wheel specifications: Diameter 150 مم, thickness 25 مم, center hole diameter 32 مم, grit size 36#, abrasive is alumina
7. Grinding wheel shaft rotation speed: 34±1 rpm
8. عداد: 0~999, 999
9. أبعاد: 58×52×46 cm (الطول × العرض × الارتفاع)
10. وزن: 60 كلغ
11. مزود الطاقة: تيار متردد 220 فولت, 50 هرتز

GA-S100 Akron Abrasion Tester

التكوين الأساسي:

One main unit, one power cord, one set of instruction manual/certificate of conformity/warranty card/nameplate.