- وصف
- سؤال
وصف
اختبار فرك التآكل الرطب
According to ASTM D 2486 و ايزو 11998.
Abrasion resistance is an important property for paint and coatings.
It’s also common for tile, flooring, أثاث, wall coverings, shower stalls, and bath tubs.
The tester produces a repeatable, controlled condition to simulate everyday use or wear pattern.
With a flexible design to use brushes, sponges, abrasive pads, and sand paper to wear the surface.
Besides abrasion testing, washability tests can also be performed.
Stain resistance and detergent testing are additional uses for abrasion testers.
اختبار فرك التآكل الرطب
سمات
Reciprocating linear motion at 37 cycles per minute.
Constant speed control over 450mm travel.
For wet or dry abrasion testing.
Preset count-down counter with automatic shut off.
Heavy duty drive system for low maintenance and long life.
Utilizes brush, اسفنجة, abrasive pads, and sand paper.
اختبار فرك التآكل الرطب
Technical Data
| Brush Specification | Each 34X86mm base plate is covered with 45pcs Ф3 holes and the length of wool is 20mm |
| Scrub Rate | 37±1cpm |
| طول السكتة الدماغية | 300مم |
| Abrasion Head Load | 450g±2g |
| Digital Counter | 5-digit |
| أبعاد | 580×480×300mm |
| Counter range | 99999مرات |
| Test plate size | 430X150X3mm |
| Motor power | 25دبليو |
| قوة | 220الخامس 50 هرتز |
| الحجم الخارجي | 580X420X280mm |
| Shipping Weight | 25KGS |
الملحقات الاختيارية
| اسم | Accessories and spare parts |
| Pig hair brush | أستم د 2486，size：38×90mm |
| Scrubbing pad | ايزو 11998，size：38×90mm |
| Scrub piece | أستم د 2486，100جهاز كمبيوتر شخصى(provide 2pcs free) |
| Adjust parts | أستم د 2486， connector consists of two brushes |
| Adjust parts | ايزو 11998，connection consists of two scrub pads |
Basic equipment configuration:
washing machine
Stand for two brushes
Two pig brushes and connecting components
Submersible pump and liquid box
