- وصف
- سؤال
وصف
BGD240 Automatic Flash Point Tester
BGD 240 Automatic Flash Point Tester is designed by rapid equilibrium closed cup method. It can rapidly test flash point of coating, طلاء (water-based paint), varnish, lacquer base, لاصق, solvent, Fatty acid methyl ester（FAME）, chemical reagent, flavor, spices, solid chemical products, viscous chemical products, , air fuel oil, البترول والمنتجات ذات الصلة.
It conforms to ايزو 3679，ايزو 3680，أستم د 3278，ASTM D3828 etc
BGD240 Automatic Flash Point Tester
الشخصيات
◆ Can detect the flash point at a specific temperature between -35 ⁄ و 105 ℃ （BGD 240/1）or RT to 105 ℃（BGD 240/2）at average rate heating.
◆ All functions are achieved through the membrane keypad and digital display.
◆ Users can select the built-in test procedures or set its own test parameters，also can modify the preinstall program to implement custom non-standard test.
◆ Built in two test procedures：rapid balanced mode and average rate heating mode
◆ Various parameters, such as the heating mode, time, temperature and the average rate heating can be set by the user themselves.
◆ Planning board action, the decline of the ignition, the detection of flash point is done automatically.
◆ A voice is prompted to user at each operation, at the end of the test there will be voice prompts, too.
◆ The gas ignition sources can be provided directly by the laboratory, you can also use the portable butane gas tank.
◆ Built-in cooling module is used to shorten the cooling time between the two tests.
◆ Amend barometric pressure automatically
BGD240 Automatic Flash Point Tester
المعلمات التقنية الرئيسية
■ Flash Point Temperature Range: For BGD 240/1：-35℃ to 105℃；For BGD 240/2： RT to 300℃
■ Tested Flash Point Temperature Accuracy: 0.5درجه مئوية
■ Sample Volume: 2مل
■ Heating Rate: Customize, quickest speed 5℃/min, longest duration 99min, highest temperature 100℃ （300℃）
■ Cooling Method: Built-in cooling module (without external cooler 0℃～100℃)
■ واجهة الإخراج: Computer RS232, printer (خياري)
■ مقاس: 400mm×220mm×170mm
■ الوزن الصافي: 6 كلغ
■ Operate Temperature: 15℃～35℃
■ مزود الطاقة: 220/240الخامس，50/60هرتز
■ Come with Accessories: Steam source regulation component，Silicone tube，2ml injector，Thermometer 0～100℃，O-Type Seal Ring（5pcs）
■ الملحقات الاختيارية: Special injector for high viscosity（thick）sample，Powdery object injector 4ml injector，Stand oil of Flash Point （49.7℃）
■ معلومات الطلبية:
BGD 240/1—Automatic Flash Point Tester（-35～105℃）
BGD 240/2—Automatic Flash Point Tester（RT～300℃）
BGD240 Automatic Flash Point Tester
الملحقات الاختيارية:
Special injector for high viscosity（thick）sample，Powdery object injector 4ml injector，Stand oil of Flash Point （49.7℃）
