- وصف
- سؤال
وصف
BGD 510Buchholz Indentation Tester
lastic deformable coatings. A beveled disc with a sharp edge is applied onto the test surface under a constant 500g. Test load provided by a steel block holder. The trace left after 30 س. Load is measured with a 20X magnification illuminated microscope. The length of the indentation is inversely proportional to the hardness.
◆ Conform with Standard ISO 2815
◆ Stainless steel block
◆ Circular tool is a double cone block
◆ Circular tool and support of hard metal
◆ Marking triangle for precise positioning.
◆ 20x magnification with graduated scale to measure indentation length.
BGD 510Buchholz Indentation Tester
المعلمات التقنية الرئيسية：
■ Indentation load：500±5g
■ Indentation Diameter：30±0.2mm
■ Indentation Width：5± 0.1 ملم
■ Indentation Angle：60°±0.5°
■ Accuracy of indentation reading：0.1مم
■ معلومات الطلبية：BGD 510—اختبار المسافة البادئة بوخهولز
BGD 510 اختبار المسافة البادئة بوخهولز
lastic deformable coatings. A beveled disc with a sharp edge is applied onto the test surface under a constant 500g. Test load provided by a steel block holder. The trace left after 30 س. Load is measured with a 20X magnification illuminated microscope. The length of the indentation is inversely proportional to the hardness.
◆ Conform with Standard ISO 2815
◆ Stainless steel block
◆ Circular tool is a double cone block
◆ Circular tool and support of hard metal
◆ Marking triangle for precise positioning.
◆ 20x magnification with graduated scale to measure indentation length.
BGD 510Buchholz Indentation Tester
المعلمات التقنية الرئيسية：
■ Indentation load：500±5g
■ Indentation Diameter：30±0.2mm
■ Indentation Width：5± 0.1 ملم
■ Indentation Angle：60°±0.5°
■ Accuracy of indentation reading：0.1مم
■ معلومات الطلبية：BGD 510—اختبار المسافة البادئة بوخهولز
BGD 510Buchholz Indentation Tester
lastic deformable coatings. A beveled disc with a sharp edge is applied onto the test surface under a constant 500g. Test load provided by a steel block holder. The trace left after 30 س. Load is measured with a 20X magnification illuminated microscope. The length of the indentation is inversely proportional to the hardness.
◆ Conform with Standard ISO 2815
◆ Stainless steel block
◆ Circular tool is a double cone block
◆ Circular tool and support of hard metal
◆ Marking triangle for precise positioning.
◆ 20x magnification with graduated scale to measure indentation length.
BGD 510Buchholz Indentation Tester
المعلمات التقنية الرئيسية：
■ Indentation load：500±5g
■ Indentation Diameter：30±0.2mm
■ Indentation Width：5± 0.1 ملم
■ Indentation Angle：60°±0.5°
■ Accuracy of indentation reading：0.1مم
■ معلومات الطلبية：BGD 510—اختبار المسافة البادئة بوخهولز
