ايزو 2813-2014 الدهانات والورنيشات – Determination of mirror gloss at 20°, 60° and 85° non-metallic paint films
مقدمة
ايزو (المنظمة الدولية للتوحيد القياسي) هو تحالف عالمي لهيئات المعايير الوطنية (الهيئات الأعضاء في منظمة الأيزو). عادة ما يتم تطوير المعايير الدولية من خلال اللجان الفنية ISO. يحق لكل مؤسسة عضو مهتمة بموضوع تم تشكيل لجنة فنية له أن تكون ممثلة في تلك اللجنة. وتشارك أيضًا في هذا العمل المنظمات الحكومية الدولية وغير الحكومية المتعاونة مع ISO. تعمل ISO بشكل وثيق مع اللجنة الكهروتقنية الدولية (اللجنة الانتخابية المستقلة) في جميع المسائل المتعلقة بالتوحيد الكهربائي.
يتم وصف الإجراءات المستخدمة لتطوير هذه الوثيقة وتلك المستخدمة لمزيد من الصيانة في الجزء 1 لتوجيهات ISO/IEC. بخاصة, وينبغي إيلاء الاهتمام لمعايير الموافقة المختلفة المطلوبة لأنواع مختلفة من وثائق ISO. تمت صياغة هذه الوثيقة وفقًا لقواعد التحرير الخاصة بجزء توجيه ISO/IEC 2 (راجع iso.org/directives).
ايزو 2813-2014 الدهانات والورنيشات – Determination of mirror gloss at 20°, 60° and 85° non-metallic paint films
يرجى ملاحظة أن بعض عناصر هذه الوثيقة قد تكون خاضعة لحقوق براءات الاختراع. ISO ليست مسؤولة عن تحديد أي أو كل براءات الاختراع هذه. يمكن العثور على تفاصيل أي حقوق براءة اختراع تم تحديدها أثناء إعداد الوثيقة في المقدمة و/أو في قائمة مطالبات براءات الاختراع التي تتلقاها ISO (راجع iso.org/patents).
يتم توفير أي أسماء تجارية مستخدمة في هذه الوثيقة لراحة المستخدم ولا تشكل مصادقة.
For a description of the meaning of ISO-specific terms and expressions related to conformity assessment, and for information on ISO compliance with WTO principles in Technical Barriers to Trade (TBT), please see the following URL: Foreword – Supplementary information.
ايزو 2813-2014 الدهانات والورنيشات – Determination of mirror gloss at 20°, 60° and 85° non-metallic paint films
The committee responsible for this document is ISO/TC 35, Paints and Varnishes, اللجنة الفرعية SC 9, Common Test Methods for Paints and varnishes.
The fourth edition cancelled and replaced the technically revised third edition (ايزو 2813:1994). It also incorporates ISO 2813:1994 / كور 1:1997 التصحيح الفني.
The main technological changes are:
أ) The title has been changed;
ب) The scope has been extended to include gloss measurement of metal coatings;
ج) على المدى “specular gloss” has been replaced with “gloss”;
د) Gloss value is expressed in gloss unit (GU);
ه) A new annex on possible sources of error has been added (Annex A);
و) A new annex on calibration standards has been added (Annex B);
ز) A new annex has been added to the glossiness calculation of the main reference standards (Annex C);
ح) A new annex on precision details has been added (Annex D);
i) Precision data is the result of large-scale inter-laboratory testing.
ايزو 2813-2014 الدهانات والورنيشات – Determination of mirror gloss at 20°, 60° and 85° non-metallic paint films
1 يتراوح
This international standard specifies methods for determining the gloss of coatings using three geometries of 20°, 60° or 85°. This method is suitable for the glossiness measurement of non-textured coatings on flat and opaque substrates.
Note that comparative gloss measurements can be made on samples different from the above. لكن, there is no guarantee that the obtained gloss value corresponds to the visual gloss perception (see Annex A).ايزو 2813-2014 الدهانات والورنيشات – Determination of mirror gloss at 20°, 60° and 85° non-metallic paint films
2 المراجع المعيارية
All or part of the following documents are referred to normatively in this document and are required for their application. للمراجع المؤرخة, تنطبق النسخة المذكورة فقط. للمراجع غير المؤرخة, نسخة جديدة من المرجع (بما في ذلك أي مراجعات) ينطبق.
ايزو 1514, الدهانات والورنيشات – Standard panels for testing
ايزو 2808, الدهانات والورنيشات – Determination of film thickness
ايزو 4618:2014, الدهانات والورنيشات. المصطلحات والتعاريف
ايزو 2813-2014 الدهانات والورنيشات – Determination of mirror gloss at 20°, 60° and 85° non-metallic paint films
3 المصطلحات والتعاريف
لأغراض هذه الوثيقة, المصطلحات والتعاريف الواردة في ISO 4618 وتطبق المواد التالية.
3.1 Luster
The optical properties of a surface are characterized by the ability of its mirror to reflect light
ملحوظة 1: Examples of gloss include high gloss, gloss, silk gloss, semi-gloss, satin, matte, and dead matte.
[مصدر: ايزو 4618:2014, 2.132]
3.2 Geometry
Identify gloss measurement methods using a specified Angle and a specified aperture
3.3 Gloss value
For the specified reflection Angle and the specified aperture Angle of the light source and the acceptor, the luminous flux reflected from the specimen is multiplied by the ratio of the luminous flux of 1,567 on a glass surface with a refractive index of 1,567 in the mirror direction to the luminous flux of 587,6 nm in the mirror direction
ملحوظة 1: Gloss value is expressed in gloss unit (GU). Gloss values are not allowed to be interpreted and represented as “% reflections”.
ملحوظة 2: The gloss value measured on the coating is expressed as rounded to the nearest whole number (no decimal).
ملحوظة 3: To define gloss, polished black glass with a refractive index of 587,6 at a wavelength of 1,567 nm is assigned values for the 100°, 60°, and 85° geometers.
ملحوظة 4: Glass surfaces with a reflectance index of 1,567 at a wavelength of 546,1 نانومتر (the central wavelength of the spectral luminescence efficiency function) can be used.
ملحوظة 5: Gloss value is affected by surface characteristics, such as roughness, texture, structure of the sample.
ايزو 2813-2014 الدهانات والورنيشات – Determination of mirror gloss at 20°, 60° and 85° non-metallic paint films
Only the standard information section is public. لرؤية المحتوى كاملا, you need to purchase the standard through the official channels.