GA-61 Horn impact resistance test device
- Beskrywing
- Ondersoek
Beskrywing
Horn impact test device
Meet the standard: 2423.55-2006-T “Electrical and electronic products environmental test Part 2 Test method Test EW hammer test” GB/T 20138-2006 “Electrical equipment shell protection grade against external mechanical collision (IK code)” GB7251.5-2008 “Low-voltage switchgear and control equipment Part 5: Special requirements for Power distribution sets of public power Grids, IEC 60068-2-63\IEC 60068-2-75 and IEC60439-5
Toepassing: It is suitable for the mechanical impact strength test of the shell of metal sheet such as transformer cabinet, non-metal energy metering cabinet, substation cable distribution board and cable distribution box.
Sample range: energy metering cabinet, substation cable distribution board and cable distribution box and similar equipment enclosures.
Structure and function: The equipment adopts the trolley structure, which can move the whole left and right, the height of the upper and lower impact point is adjustable, and the impact Angle is adjustable from 0 to 90°. The device is a high energy pendulum impact device above 2J.
Horn impact test device
| Parameter/Model | |
| Pendulum bar | A steel pipe with a length of 1000mm, an outer diameter of 15.9mm and a wall thickness of 1.5mm constitutes each equivalent mass with the hammer head |
| Impact point | Adjustable up and down, travel 200-1200mm, customizable height |
| Impact element | 5kg horn impact hammer head |
| Drop height | Scale display |
| Release mode | mechanical |
| Algehele dimensie | 1300 * 500 * 2300 |
