Beskrywing

Ohm Meter

Kort inleiding

AT2511 is the upgrade version of AT511A, is a resistance meter with high-cost performance and small volume, which can measure 10μΩ – 200kΩ, max reading 5000 dgt.It is quite suitable for resistance measurement under low power conditions or factory inspection and product sorting based on its sorting function.

 

Ohm Meter

Tegniese parameter

SPESIFIKASIES

AT2511

AT511C (discontinued)

Parameter

DC resistance

Basiese Akkuraatheid 0.2% 0.3%
Meetreeks 10μΩ~200.0kW 0.1mW~50.00kW
Sein Bron ek – Maks: < 100mA
Reeks Automatic and manual with 8 reekse Automatic and manual with 6 reekse
Spoed Stadig: 3 times/second; Vinnig: 10 times/second
Resultaat vertoon Wys
Max Reading 5000
Aanpassing Short-circuit Zero-Adjust for each range
Vergelyker OFF, PASS, HIGH, LOW None
Beep OK, Van, OFF None
Test Lead 4 terminal shielding(2 check terminal and 2 driving terminal) and external shielding ground section
Ander LED display
Aansoeke Small diameter coil (headset coil); resistance of sensor;

Resistance test of protective device; ordinary transformer, induktor, motor, deflection coil winding resistance; all kinds of contact resistance; welding point contact resistance; mental defect detection

ALGEMENE KENMERKE
Kragtoevoer Spanning: 198V AC – 240V AC. Frekwensie: 50Hz. Krag: Max 15VA. Optional 110VAC
Grootte 220mm (Breedte)x85mm (Hoogte)x259mm (Depth), 2kg
ORDERING INFORMATION
Accessory ATL503: Kelvin toets lei

AC power cord